VITEK VTC-TNB2LPR
26
Day/Night Switch Linkage
: Having selected this mode, select the alarm type and then choose
to open or close alarm out when the camera switches to day mode or night mode.
Timing
: Select the alarm type. Then click “Add” and drag the mouse on the timeline to set the
schedule of alarm out; click “Erase” and drag the mouse on the timeline to erase the set time
schedule. After this schedule is saved, the alarm out will be triggered in the specified time.
4.4.5
Alarm Server
Go to Alarm
à
Alarm Server interface as shown below.
Set the server address, port, heartbeat, and heartbeat interval. When an alarm occurs, the camera
will transfer the alarm event to the alarm server. If an alarm server is not needed, there is no need
to configure this section.
4.5
Event Configuration
For more accuracy, here are some recommendations for installation.
