VITEK VTC-TNB2LPR
40
Multicast Address
Main stream
: The address format is
“rtsp://IP address: rtsp port/profile1?transportmode=mcast”.
Sub stream
: The address format is
“rtsp://IP address: rtsp port/profile2?transportmode=mcast”.
Third stream
: The address format is
“rtsp://IP address: rtsp port/profile3?transportmode=mcast”.
Audio
: Having entered the main/sub stream in a VLC player, the video and audio will play
automatically. If “Allow anonymous login…” is checked, there is no need to enter the username
and password to view the video. If “auto start” is enabled, the multicast received data should be
added into a VLC player to play the video.
Note
:1. This camera support local play through a VLC player. Enter the RTSP address (unicast
or multicast, e.g. rtsp://192.168.226.201:554/profile1?transportmode=mcast) in a VLC player to
realize the simultaneous play with the web client.
2. The IP address mentioned above cannot be the address of IPv6.
3. Avoid the use of the same multicast address in the same local network.
4. When playing the video through the multicast streams in a VLC player, please pay
attention to the mode of the VLC player. If it is set to TCP mode, the video cannot be played.
5. If the coding format of the video of the mainstream is MJPEG, the video may be
disordered at some resolutions.
4.6.8
UPNP
If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config
à
Network
à
UPnP. Enable UPNP and then enter UPnP name.
4.6.9
If you need to trigger Email when an alarm happens or IP address is changed, please set the Email
here first. Go to Config
à
Network
à
Email.
