VITEK VTC-TNB2LPR
46
3. Enter the old password of the user in the “Old Password” text box.
4. Enter the new password in the “New password” and “Confirm Password” text box.
5. Enter computer’s MAC address as necessary.
6. Click the “OK” button to save the settings.
Note
: To change the access level of a user, the user must be deleted and added again with the new
access level.
Delete user:
1. Select the user to be deleted in the user configuration list box.
2. Click the “Delete” button to delete the user.
Note
: The default administrator account cannot be deleted.
4.7.2
Online User
Go to Config
à
Security
à
Online User to view the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators).
4.7.3
Block and Allow Lists
Go to Config
à
Security
à
Block and Allow Lists as shown below.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP address or MAC
address in the address box and click the “Add” button.
4.7.4
Security Management
Go to Config
à
Security
à
Security Management as shown below.
