VITEK VTC-TNB2LPR
47
To prevent against malicious password unlocking, “locking once illegal login” function can be
enabled here. If this function is enabled, login failure after trying six times will make the login
interface locked. The camera can be logged in again after a half hour or after the camera reboots.
For some specified versions, anonymous login with a private protocol can be enabled here. If
this function is enabled, enter http://host:port/Anonymous/1[2/3] (e.g.
http://192.168.226.201:80/Anonymous/1) via web browser to access the camera. 1 indicates
mainstream; 2 indicates sub stream; 3 indicates third stream. Only video can be viewed by this
means and no other operations can be done. If no such function, please skip the instruction.
l
Password Security
Please set the password level and expiration time as needed.
Password Level: Weak, Medium, or Strong.
Weak level: Numbers, special characters, upper or lower case letters can be used. You can choose
one of them or any combination of them when setting the password.
Medium Level: 9~15 characters, including at least two of the following categories: numbers,
special characters, upper case letters and lower-case letters.
Strong Level: 9~15 characters. Numbers, special characters, upper case letters and lower-case
letters must be included.
For your account security, it is recommended to set a strong password and change your password
regularly.
4.8
Maintenance Configuration
4.8.1
Backup and Restore
Go to Config
à
Maintenance
à
Backup & Restore.