VITEK VTC-TNB2LPR
39
higher the version is, the higher the level of the security is.
4.6.6
802.1x
If it is enabled, the camera’s data can be protected. When the camera is connected to the
network protected by the IEE802.1x, user authentication is needed.
To use this function, the camera should be connected to a switch supporting 802.1x protocol.
The switch can be reckoned as an authentication system to identify the device in a local
network. If the camera connected to the network interface of the switch has passed the
authentication of the switch, it can be accessed via the local network.
Protocol type and EAPOL version: Please use the default settings.
Username and password: The username and password must be the same with the username and
password applied for and registered in the authentication server.
4.6.7
RTSP
Go to Config
à
Network
à
RTSP.
Select “Enable” to enable the RTSP function.
Port
: Access port of the streaming media. The default number is 554.
RTSP Address
: The RTSP address (unicast) format that can be used to play the stream in a media
player.
