Wizard & Main Interface
DVR User Manual
13
Click “
Edit Security Question”
to set questions and answers for password security of admin.
If you forget the password, please refer to Q4 in Appendix A FAQ for details.
Click “Next” to continue or click “Cancel” to exit the wizard.
�
Network Settings
. Check “Obtain an IP address automatically” and “Obtain DNS
automatically” to get the IP address and DNS automatically (the DHCP function of the router
in the same LAN must also be enabled), or manually enter them. Enter the HTTP port, HTTPS
port, RTSP port and Server port (please see 11.1.2 Port Configuration for details). Click “Next”
to continue.
�
Add Camera
. Click “Refresh” to refresh the list of online IP cameras which are in the
same local network with DVR and then click
to add the searched camera. Click “Add
All” to add all the cameras in the list. Click
to delete the added camera. Click “Delete
All” to delete all the added cameras.
Wizard & Main Interface
DVR User Manual
14
Click
to edit the found IP camera as shown on the below left. Enter the new IP address,
subnet mask, gateway and the password of the camera. You can check “Sync to IPC” to modify
the IP address of the IPC via different network segments for being in the same network
segment with the DVR. Click “OK” to save the settings.
Click
to edit the added camera as shown on the above right. Enter the new camera name,
IP address, port, username and the password of the camera. You can click “Test” to test the
effectiveness of the input information. Click “OK” to save the settings. You can change the
camera name only if it’s an analog camera or the added IPC is online. Click “Next” to
continue.
�
Disk Settings.
You can view the disk number, disk capacity of the DVR and serial number,
R&W status of the disk. Click “Formatting” to format the disk. Click “Next” to continue.
�
Record Settings
. Two record modes are available: auto and manual.
Auto
: Select one auto mode in the interface as shown below and then click “OK” button to save