Record & Disk Management
DVR User Manual
47
7
Record & Disk Management
7.1 Record Configuration
7.1.1 Mode Configuration
Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click
Start
à
Settings
à
Record
à
Mode Settings to go to the mode settings interface. You can set the
record time under the “Manual Record Settings” and then click “Apply” button to save the
settings. There are two record modes: auto mode and manual mode.
Ø
Auto Mode
Motion Record
: Motion alarm record will be enabled when motion alarm happens.
Sensor Record
:
Sensor alarm record will be enabled when sensor alarm happens.
Motion Sensor Record
:
Motion/sensor alarm record will be enabled when
motion/sensor alarm happens.
Always(24
ⅹ
7) Motion Record
:
Normal record is enabled all the time; motion alarm
record will be started when motion alarm happens.
Always(24
ⅹ
7) Sensor Record
: Normal record is enabled all the time; sensor alarm
record will be started when sensor alarm happens.
Always(24
ⅹ
7) Motion Sensor Record
:
Normal record is enabled all the time;
motion/sensor alarm record will be enabled when motion/sensor alarm happens.
Always(24
ⅹ
7) Motion Sensor Analytics Record
:
Normal record is
enabled all the time; motion/sensor/intelligence alarm record will be enabled when
Record & Disk Management
DVR User Manual
48
motion/sensor/intelligence alarm happens.
Always(24
ⅹ
7) Motion Sensor Analytics POS Record
:
Normal record is enabled all the time; motion/sensor/Analytics/POS alarm record will be
enabled when motion/sensor/ Analytics /POS alarm happens.
Some models may not support POS recording.
You can add more auto modes on intelligence record. Click “Advanced” button to pop up a
window as shown below. Check the modes in the window and then click “Add” button to show
the modes in the record mode list (in the window, the checked modes can be shown in the
record mode list while the unchecked modes cannot; you cannot only check “
Always(24
ⅹ
7)
Record
”).
Select one auto mode to pop up the corresponding window. Set the encode, GOP, resolution,
FPS, bitrate type, quality, max bitrate and audio of each camera and then click “OK” to save
the settings. Please adjust the parameters according to the actual condition.
Video Encode
: the video encode format of the camera.
GOP:
group of pictures.
Resolution
: the higher the resolution is, the clearer the image is.
