Device Management
DVR User Manual
101
③
Enable wireless function.
④
Choose the wireless type as needed.
⑤
Click “Network Status” to view the 3G/4G connection status and get the IP address.
11.1.13 View Network Status
Click Start
à
Settings
à
Network
à
Network Status to view the network status or click
on
the tool bar at the bottom of the live preview interface to view network status conveniently.
11.2 Basic Configuration
11.2.1 Common Configuration
Click Start
à
Settings
à
System
à
Basic
à
General Settings to go to the following interface.
Device Management
DVR User Manual
102
Set the device name, device No., language, video format and main output resolution. Enable or
disable wizard, “Log In Automatically”, “Log Out Automatically” (if checked, you can set the
wait time) “App Live Self-Adaption” and “Dwell Automatically” (if checked, you can set the
wait time). Click “Apply” to save the settings.
Device Name
: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Video Format
: Two modes: PAL and NTSC. Select the video format according to the camera.
Spot:
If the DVR supports spot output, you should enable spot output. Connect the spot output
device to the DVR and then set the spot output (see 5.2.4 Spot View for details).
Dwell Automatically:
Switch automatically. Check it and set “wait time”.The system will
switch images automatically if it is not operated during the time you set.
11.2.2 Date and Time Configuration
Click Start
à
Settings
à
System
à
Basic
à
Date and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the DVR. The default time zone
is GMT-08 Las Vegas, San Francisco, Vancouver. If the selected time zone includes DST, the
DST of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual
: select “Manual” in the “Synchronous” option and then click
after the “System