Device Management
DVR User Manual
93
③
After the certificate has been installed, enable this function and apply it. Then the camera
can be accessed by entering https://IP: https port via the web browser (eg.
https://192.168.1.201:443).
Server Port
: the default server port of the DVR is 6036. The server port number can be
changed as required. The port is mainly used in network video management system.
RTSP Port
: RTSP real-time stream protocol can be used to control the sending of real-time
data. By media player which supports the RTSP real-time stream protocol, you can view the
live images simultaneously. The default RTSP port is 554 and it can be changed as needed.
POS Port:
the default POS port of the DVR is 9036.
11.1.3 PPPoE Configuration
Click Start
à
Settings
à
Network
à
PPPoE to go to the interface as shown below. Check
“Enable” in “PPPoE Settings” and then enter the username and password obtained from the
dealer. Click “Apply” to save the settings.
11.1.4 DDNS Configuration
The DDNS is used to control the dynamic IP address through domain name. You can access
the DVR easily if the DDNS is enabled and configured.
Click Start
à
Settings
à
Network
à
DDNS to go to the interface as shown below.
Note: The HTTP port and server port of the DVR should be mapped to the router before you access
the DVR via WAN.
Device Management
DVR User Manual
94
Check “Enable” and then select the DDNS type. Enter the server address, domain name,
username and password according to the selected DDNS type. Click “Test” to test
the effectiveness of the input information. Click “Apply” to save the settings.
You will have to enter the server address and domain name if some DDNS types are selected.
Go to the relative DNS website to register domain name and then enter the registered domain
information here). Now we take
www.vitekivpddns.com
for example.
�
Enter
www.vitekivpddns.com
in the address bar of a web browser to visit its DNS website.
�
Click
Registration
to go to the interface as shown below. Set the DDNS account
information (username, password and so on) and then click
Submit
to save the account.
