Record & Disk Management
DVR User Manual
53
Click “All” to set all week recording; click “Reverse” to swap the selected and unselected time
in a week; click “Clear All” to clear all the selected area in a week.
7.3.2 Record Schedule Configuration
Click Start
à
Settings
à
Record
à
Record Schedule
à
Schedule Configuration to go to the
interface as shown below. Set the schedule of sensor record, motion record, timed record and
intelligence record. Click “None” in the drop-down menu to clear the schedule. Click “Apply”
to save the settings.
Go to “Edit Schedules” interface and then click
to edit the schedule. The settings of
“Edit Schedule” are similar to that of the “Add Schedule”. Click
to delete the schedule.
7.4 Record Mode
7.4.1 Manual Recording
Method One
: Click
on the tool bar at the bottom of the live preview interface to enable
recording of the camera.
Method Two
: Go to live preview interface and then click the right-click menu “Manually
Record On” in the camera window or click
on the tool bar under the camera window to
start recording.
Note: Click Start
à
Settings
à
Record
à
Mode Settings and then set the manual record time in the
interface. Click “Apply” to save the settings.
Record & Disk Management
DVR User Manual
54
7.4.2 Timing Recording
Timing Recording
: the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 7.3 Schedule Setting for details.
7.4.3 Motion Based Recording
Motion Based Recording
: the system will start motion based recording when motion object
appears in the setup schedule. The setup steps are as follows:
�
Set the motion based recording schedule of each camera. See 7.3 Schedule Setting for
details.
�
Enable the motion and set the motion area of each camera. See 9.2.1 Motion
Configuration for details.
The camera will start motion based recording once you finish the above settings.
7.4.4 Sensor Based Recording
�
Set the sensor based recording schedule of each camera. See 7.3 Schedule Setting for
details.
�
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure
the “Record”. See 9.1 Sensor Alarm for details.
7.4.5 Intelligence Recording
�
Set the intelligence recording schedule of each IP camera. See 7.3 Schedule Setting for
details.
�
Enable the intelligence detection (object detection, exception, line crossing or intrusion
detection) and draw alert surface or warning area of each IP camera. See 9.3 Intelligence
Alarm for details.
The camera will start intelligence recording once you finish the above settings. This function
is only available for some IPCs.
7.5 Disk Management
Click Start
à
Settings
à
Disk
à
Disk Management to go to disk management interface. You can
view the DVR’s disk number and disk status and so on in the interface. Click the “Formatting”
button to format the HDD.
Note: 1. A new HDD should be formatted for normal use.
2. For normal use of the HDD which has been used in other DVR, if the DVR is of the same model
with the new DVR, please import the configuration file of the DVR to the new DVR or format the
HDD; if the models of the two DVRs are different, please format the HDD.