20
Beat2Phone ECG Instruction Manual
Users can change their personal details, password and their consent for cloud
storage.
Internet connection is required when profile changes are made.
6.3
Shutdown procedure
To power off the paired sensor with the application, remove sensor from charger,
choose
SETTINGS
->
SENSOR INFORMATION
->
POWER OFF SENSOR
. The
sensor can be powered on again by placing it in the charging connector that is
connected to mains. Patient users cannot shut down the sensor. Sensors are
shut down at the factory to prevent sensors from starting to operate and battery
from discharging during transport.
The sensor will also go to sleep mode automatically when not in use or when
moved, and not charging. In this case shaking the sensor will turn it on.
6.4
Uploading and viewing recordings in the sensor: Professional users
Recordings stored in the sensor memory must be transferred to the mobile de-
vice before the recordings can be viewed in the application. After the patient
monitoring has ended, detach the sensor from the strap and place it in the charg-
ing connector. Connect the charging connector to mains. A file upload dialog will
be displayed in the application to start transfer of stored files to the mobile de-
vice. The mobile device must be within few meters from the sensor to transfer
the files.
Figure 6-13: File upload dialog.