17
Beat2Phone ECG Instruction Manual
The mobile device’s
Patient monitoring view
displays the live ECG signal and
the heart rate curve. The yellow number indicates heart rate in beats per minute,
and the yellow curve indicates the heart rate curve. If display of heart rate varia-
bility (HRV) is enabled in the settings, the red number indicates the HRV in milli-
seconds, and the red curve indicates the HRV curve. To save the batteries of
both the mobile device and the sensor, the live monitoring screen can be turned
off by turning the mobile device screen off. Measurement is ongoing and data is
stored. Recording time is shown at the top right corner of the screen. The moni-
toring view has a Stop button for ending the recording. You can also use a 'mark-
er' button for making annotations in the patient monitoring mode.
Figure 6-9: Patient monitoring view.
During measurement, the patient can add a marking/annotation to the recording
in the
Patient annotation view
, which is displayed when you open the applica-
tion in the mobile device after turning the mobile device screen off. Keep your
mobile device close by to enable timely annotations.
Figure 6-10: Patient annotation view.