Vista powerdome pro series, Installation Manual

Page: 58 / 83

PowerDome PRO manual V3-6
57
Preset (1~220): Enable Preset function.
Tour (1~4): Enable Tour function.
Learn tour (1~4): Enable Learn tour function.
Autopan (1~4): Enable Autopan function.
NOTE:
1. Specified times can not be overlapped between running channels. This will prevent any action
from being executed
2. The clock on the unit needs to be enabled to run any event
3. Operators can take control during a timed action. The unit will return to the timed function if
5. Days To Run
This allows the operator to specify which days of the week that the schedule will operate, and also
whether Schedules are to run on days defines as holiday ( see next sections). Selecting this option
will display the following table. As default the schedule is set to run on all days:
6. Holidays
8 dates can be defined as holiday days, and the option as to whether or not to run the schedule on
these days can be selected: