Vista powerdome pro series, Installation Manual

Page: 24 / 83

PowerDome PRO manual V3-6
23
Pendant / Wall Mount Adaptor Collar
This collar is supplied in order to allow installation of the PowerDome Pro series onto the Swan Neck (VDM-
TM) and pendant drop brackets such as the (VDM-P250). It also ensures backward compatibility with existing
PowerDome installations. (For Example - in the event of a replacement dome being fitted to replace an
existing PowerDome1 or 2)
This collar is screwed onto the top thread of dome housing (Use PTFE tape on the thread to ensure
waterproof sealing. ) The three threaded holes are available for connecting to any Vista PowerDome bracket.
See drawing below:
PowerDome Pro housing
with collar attached, then
mounted onto PowerDome
1 wall mount bracket
IMPORTANT
– Please use
PTFE tape on the thread of
the dome housing to
ensure waterproof seal.