Vista powerdome pro series, Installation Manual

Page: 51 / 83

PowerDome PRO manual V3-6
50
5.2 Tour Setup
Main menu → Function Setup →Tour setup
A ―tour‖ is defined as a sequence of movements from one preset to the next at a fixed speed, with pause
for a specific time at each preset.
Up to 4 tours can be stored.
Each can store 32 presets at maximum.
1. Preset Tour No. :
This sets the tour number ranging from 1 to 4.
2. Title:
Each tour can be individually titled
3. Default Dwell:
This sets the global time for which the VPP remains at one preset before moving to the next. (1 to
255 seconds).
E.g. 003-002 means that preset 003 is accessed and paused for 2 seconds. Move joystick to the left
or right to select editing item, and then move it to up or down to change value.
Take the above picture for example, the VPP rotates from preset 1 to preset 4 and the pauses time
is for 2 seconds, 4 seconds, 2 seconds, and 1 second respectively.
Select Save and Exit to save the tour, select Discard to quit without saving.
NOTE: The Unit will consider preset 0 as the end of a tour.
4. Edit Preset Tour :
This sets order and individual paused time spent at each preset position. It is possible to set 32
positions as shown in the following illustration.