Vista powerdome pro series, Installation Manual

Page: 34 / 83

PowerDome PRO manual V3-6
33
1.1 Device Setup
Main menu → System Setup → Device Setup
1. DEVICE ID:
This
identifies the current unit’s ID number. Each unit has its unique ID ranging from
001 to 255 (255 is
default broadcast ID). This can be set via the menus only if the DIP switches are set to programmable
mode, all switches set to ON. Otherwise this is set via the dip switches see Appendix 2.
To set the Device ID via the menu:
a) Move the cursor to select INPUT from Unit ID .The INPUT setting will show the following picture.
b)
Move the joystick to the right and enter the serial number as displayed in the title ―Enter S/N‖ setting.
c) Move the joystick up or down to input the number, and move it to the left to save the setting.
d) Move the joystick to the left or right to quit this editing.
e)
Select ―Enter‖ to return to the previous menu.
Tip: Move the joystick clockwise or anti-clockwise to select upper case, lower case and numeric input.
NOTE:
If the S/N is not identical with the original one, the following picture will pop out. Please repeat step 1
through step 5.