Vista powerdome pro series, Installation Manual

Page: 26 / 83

PowerDome PRO manual V3-6
25
Side Pole-Mounting (VDM-EPMAg)
Preparing the mounting surface
CAUTION:
For all installations, heed the following cautions.
Complete all installation steps before supplying power to the dome.
To ensure proper operation of a PTZ unit, ensure the mount is level.
For safety, the mounting surface, hardware and procedure used for securing the dome must support the weight of the dome,
cables and any structural or environmental vibration according to local regulations. Minimum load for this installation is 4-times
the weight of the do me (see page 13 for weights).
To prepare the mounting surface:
1. The outside diameter of the pole must be between 130
– 150mm (5.12‖ – 6‖)
[Figure 41]
2. Fix the mounting base to the pole. [Figure 42]
Feed the power, RS485, video cable through the central hole of the bracket base.
3. Mounting the Wall Bracket to the Pole Bracket. [Figure 43]
Pull the cables through the wall bracket.
Connect the wall bracket to the corner bracket.
4. Now follow the instruction for Mounting a Wall Bracket page 20, point 7.
[Figure 41] [Figure 42] [Figure 43]