Vislink Strata RX, Technical Reference Manual

Page: 79 / 186

Advanced Operation 5-3
Strata RX
Technical Reference Manual
Figure 5-1: Main Page
3. Click on the system components for which you are
creating a configuration.
- If you have an RXU, be sure to click on the
RXU DCC
and
RX Front Panel
blocks. Also click on any other
blocks you wish to configure.
See Figure 5-2 for an example of an RXU-only
configuration.
- If you have an RCU, be sure to click on the
RCU DCC
and
RC Front Panel
blocks. Also click on any other
blocks you wish to configure.
See Figure 5-3 for an example of an RCU-only
configuration.
4. Select each Tab and make your choices for
settings on that Page.
See Figure 5-4 for an example of a configuration
containing both an RXU and an RCU.
See Appendix C for details of the choices on each
page.
Note You may notice that some of the choices on the
Pages are greyed out and not operating. This is
typically because the
Operation Mode setting for
that Preset (on the Radio Page ) is set to a mode
that does not use this choice.
For more details see Appendix C.
5. When your configuration is complete, save it to a
file.
See ”Saving the Configuration to a File” on page 5-8.