Vislink Strata RX Technical Reference Manual Download Page 12

Page: 12 / 186

Introduction

1-2

Strata RX

Technical Reference Manual

(part no. 400494-1)

•

Strata RX Quick Reference Card
(part no. 400496-1)

•

Strata RX Remote Control Panel
(part no. 400497-1)

1.6

Ordering documentation

Any of the above manuals may be ordered by contacting Vislink
Communications Ltd. Customer Service, at our US Support
Centre:

Business Hours:

Monday - Friday

8:00 AM - 5:00 PM Eastern Time (US)

(0800 - 1700 hrs US ET)

Telephone:

800-490-5700

978-671-5700

Fax:

978-671-5800

When contacting Customer Service, please have the following
information available:

•

Model number and serial number of the unit. This is
located on a label on the bottom of each unit.

•

Approximate purchase date.

•

Firmware revision, which appears on the display at
startup.

1.7

Calling for Service

Technical Support is available 24 hours a day, 7 days a week,
through Vislink Communications Ltd.’s US Support Centre.

During regular business hours you can reach our expert staff
directly. After hours, your call will be forwarded to the on-call
technical support specialist.

Business Hours:

Monday

8:00 AM - 5:00PM Eastern Time (US)

(0800 - 1700 hrs US ET)

Tuesday - Friday

8:00 AM - 7:00PM Eastern Time (US)

(0800 - 1900 hrs US ET)

Telephone:

800-490-5700

978-671-5700

Fax:

978-671-5800

Email:

[email protected]

When contacting Technical Support, please have the following
information available:

•

Model number and serial number of the unit. This is
located on a label on the bottom of each unit.

•

Approximate purchase date.

•

Firmware revision, which appears on the display at
startup.

1.8

Supported Repairs

The Strata RX System (including the RXU and RCU) is designed

Summary of Contents for Strata RX



























































































































































































Search results

Summary of Contents for Strata RX

Reviews:

Related manuals for Strata RX

Brands by name

Popular brands

Vislink Strata RX, Technical Reference Manual

Search results

Summary of Contents for Strata RX

Reviews:

Related manuals for Strata RX

Brands by name

Popular brands