Vislink Strata RX, Technical Reference Manual

Page: 92 / 186

Advanced Operation 5-16
Strata RX
Technical Reference Manual
See Figure 5-20.
- The button label becomes gray while the Preset is
being recalled. (The text on the button label does not
change.)
- The button label becomes dark again when the
operation is complete.
- The information at the top of the page updates to
reflect the new Preset.
- There is no Progress Bar associated with this
operation.
Figure 5-20: Recalling a Preset
Log to File
The
Log to File
function allows you to save the
results of the monitoring in a text file which you can later print
and review. This logging starts when you click
Log to File
and
continues until you stop logging.
To use
Log to File
, follow these steps:
1. On the Monitoring Page, click Log to File.
The button label changes from
Log to File
to
Stop
Logging
.
2. When you are done logging, click
Stop Logging
.
Log File Location
The Log File is automatically saved in the
same directory or subdirectory where the Configurator software
is located. Typically this will be under:
C:\Program Files\Strata_RX_Configurator.
Log File Name
The Log File is automatically named with the
date and time the logging started. The format is as follows:
LogYYYYMMDD_HHMM.text
where
YYYY = year (e.g., 2004)
MM = month (e.g., 06 = June)
DD = day (e.g., 21)
HH = hours (in 24 hour format, e.g., 2:00 PM = 14)
MM = minutes (e.g., 45)
A log file created on April 27, 2004 at 1:32 PM would be named:
Log20040427_1332.txt