HDR-5000 User and Technical Manual
5
1.4 Rear Panel Description
Figure 1-5
shows the rear panel of the HDR-5000. The associated table describes the features. For more
information about connector specifications, see
Chapter 5,
HDR-5000 Specifications
.
Figure 1-5. HDR-5000 Rear Panel (HDR-5000-3 shown)
HDR-5000 Rear Panel Connections
1
IP OUT
4 Ethernet connections
2
GND
2 Protective Earth Ground terminals identify connections intended for
joining the HDR-5000 to an external conductor for protection against
electric shock, in the case of a fault or the terminus on a protective earth
electrode.
3
BDC1, BDC2, BDC3, BDC4, BDC5,
BDC6
The
BDC
TNC block downconverter connectors accept UHF signals
from the block downconverters and their corresponding antennas. To
power each downconverter, +18.5 VDC is applied to the coaxial cable
that runs from the
BDC
connector to the downconverter.
4
COMPOSITE VIDEO PREVIEW
(HDR-5000-3 only)
Passes the composite video to the video preview screen on the front
panel (see Figure 1-4).
5
ASI OUT
The ASI OUT BNC connector provides ASI Output for digital video and
audio distribution.
6
USB
2 USB interface connections (factory use only)
7
PWR INPUT
AC power; an auto-sense circuit accepts either 105 to 130 VAC or 205 to
240 VAC.
Summary of Contents for HDR-5000
Page 6: ......