background image

1

Safety Instructions

Danger Symbol

The lightning flash with arrowhead symbol 
within an equilateral triangle is intended to 
alert the user to the presence of dangerous 
voltage in the unit

Warning Symbol

The exclamation point within
an  equilateral triangle is intended  to 
alert the user  to the presence of 
important operation   and   maintenance   
(servicing) instructions in  the manual  
accompanying the unit.

WARNING

To prevent fire or electric  shock, do not  expose the  unit to rain   or moisture.  Never attempt  to open the cabinet,  

dangerous high voltages are presented in the unit. Refer servicing to qualified service personnel when necessary. 

Do  not  put the  unit: near strong magnetic field, somewhere exposed to direct sunlight or near  heat radiation 

equipment (such as a heater), at top of other heat radiation objects,  in  a place with bad ventilation and much 

dirt, somewhere subject to vibration and instability, somewhere exposed to moisture or rain. The unit shall be 

installed in a smooth and dry place with good ventilation.

When the unit is moved from a cold place to a warm one, the laser head might get dewed and  the unit might 

not work normally.  In this case, keep the power on for an hour or two  (with no disk loaded)  before  playing 

normally.

Clean the surface of the unit with some neutral detergent. Do not use organic solvent such as alcohol or

gasoline. Never polish the unit with sand paper.

If the unit is not to be used for a long time, disconnect the power plug from the wall outlet. Note: Do not pull 

the power cord. When disconnect the unit from the wall outlet.

For optimum performance, do not place heavy objects on the unit.

Caution

Maintenance Notice

The unit employs a laser system. To prevent direct exposure to the laser radiation, do not attempt to open the 

cabinet. Visible laser may radiate when the cabinet is opened or the interlocks are defeated. 

Do not stare into the laser beams.

To ensure the proper use of the unit, read this manual carefully.

Keep this manual properly for future reference. If the unit requires servicing, please contact the seller or our 

service center

Technical Specifications

Supported disc
 formats

DVD, DVD+R/RW, DVD-R/RW, SVCD, VCD, CD-DA, JPEG

Supported 
recordable disc

DVD+R/RW, DVD-R/RW

Recording format

DVD

MPEG-II

Recording quality

HQ(Perfect Quality), SP(Standard Play), SP+, EP(Extend Play), LP, 
SLP(Standard Long Play) .

Input

Composite Video Input
S-Video Input (Y+C)
DV Input(1394)
RF Input
Analog Audio Input
USB Input

Output

Composite Video Output
S-Video Output(Y+C)
Component Video Output
Analog 5.1-Channel Audio Output
Digital Audio Coaxial Output
Digital Audio Optical Output

Input RF Features

System: PAL SECAM
Impedance: 75 

 imbalance coaxial cable 

Video 
Features

Output

Input

Composite Video
System: NTSC/PAL
Video Level: 1.00.2Vp-p 75
S-Video
Y Output Level: 1.0 Vp-p 75
C Output Level: 0.3 Vp-p 75
Video Horizontal resolution: 

500 lines

Y S/N 65dB

Composite Video
System: NTSC/PAL
Video Level: 1.00.2Vp-p 75
S-Video
Y Input Level: 1.0 Vp-p 75
C Input Level: 0.3 Vp-p 75

Technical Specifications

52

Summary of Contents for PVR-5000-250G





























Reviews: