VisionNet ADSL 201ER, User Manual

Page: 29 / 66

29
Auto Dis User Configured
This option will automatically discover your DNS server if provided by your ISP. In most
all PPP and DHCP client configurations, the ISP will download the DNS addresses as part
of the auto negotiation. If these DNS addresses were not provided, you can configure them
manually. This option will first look for auto-discovery DNS and then look at the DNS
defined in the 201ER.
Use Auto Discovery DNS Servers Only
This option will automatically discover your DNS server if provided by your ISP. In most
all PPP and DHCP client configurations, the ISP will download the DNS addresses as part
of the auto negotiation.
Use User Defined DNS Servers Only
You must enter the DNS addresses in the Primary and Secondary fields.
Disable DNS Proxy
The 201ER will not resolve DNS request. You must enter the DNS values in your TCP/IP
properties in your PC.
Primary DNS / Secondary DNS:
The Primary DNS and Secondary DNS are provided by your ISP. In PPPoE and PPPoA, the
DNS addresses are usually negotiated automatically.
Disconnect timeout:
This value will disconnect your PPP session if there is no WAN (Internet) activity.
Authentication:
You can use PAP (Password Authentication Protocol) or CHAP (Challenge Handshake Authentication
Protocol) to authenticate the client. PAP and CHAP are the methods of authentication
using PPP. When you select
“
AUTO
”
, the 201ER will automatically detect PAP, CHAP
or both.
Automatic Reconnect:
The auto-reconnect will automatically reconnect the PPP session when it goes down.
DHCP:
If your ISP uses DHCP Client for dynamically assigned IP Address, the DHCP client enable
field must be checked.