VisionNet ADSL 201ER, User Manual

Page: 4 / 66

4
Overloading
Do not overload wall (mains) outlets and extension cords as this can result in fire or electric shock.
Servicing
To reduce the risk of electric shock, do not disassemble this product. None of its parts are user
replaceable; therefore, no reason exists to access the interior. Opening or removing the cover may
expose you to dangerous voltages or other risks. In addition, incorrect reassembly can cause electric
shock when the appliance is subsequently used.
If service or repair work is required, take it to qualified service personnel.
Damage Requiring Service
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
※
If liquid has been spilled into the product.
※
If the product has been exposed to rain or water.
※
If the product does not operate normally when following the operating instructions.
※
If the product has been dropped and damaged.
※
If the product exhibits a distinct change in performance.
Modem / Telephone Use
Avoid using a modem/telephone during an electrical storm. There may be a remote risk of electric
shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
If telephone service is required on the same line and for optimum ADSL performance, distributed
filters must be installed. Depending on your ADSL configuration and type of filters, installation may
be required by qualified service personnel. Consult your telephone company or ADSL service provider
for instructions.