62
Appendix
If you use 1483 Bridged/Routed IP encapsulation and disabled NAT/NAPT, you will need to configure
the IP address of your PC to a static address provided by your ISP.
Follow these instructions according to what operating system you use.
▶
Windows 95, 98, 98SE and Me
1. From the
Start
menu on the tool bar, select
Settings
, then
Control Panel
. Double-click on the
Network
icon.
2. The
Network
window appears. Select the
Configuration
tab, scroll down the installed network
components window and find your TCP/IP-->NIC (Network Interface Card). Click the
Properties
button.
3. The
TCP/IP Properties
window appears. Select the
IP Address
tab and select the
Specify an IP
Address
option. Enter the
IP Address
and
Subnet Mask
settings supplied by your ISP.
Select the
Gateway
tab to setup a new gateway and enter the setting (supplied by your ISP) in the
New gateway
section. Click
Add
. Select the
DNS Configuration
tab and choose the
Enable DNS
option. You need to have available the
Host
,
Domain
and
DNS
settings supplied by your ISP. Now
enter your host name into
Host
, enter your domain name into
Domain
and enter DNS number into
DNS Server Search Order
box. Click
Add
. If you have more than one DNS numbers, repeat this step.
4. After setting all the necessary TCP/IP Properties, click
OK
.
5. The
Network
window appears. Click
OK
.
6. The
System Setting Change
window appears. You will be asked if you want to restart your computer.
Click
Yes
.
▶
Windows 2000
1. Double-click
My Computer
, then
Control Panel
, and then
Network and Dial-up Connections
.
2. The
Network and Dial-up Connections
window appears. Right-click on the
Local Area Connection
for TCP/IP network adapter and select
Properties
.
3. The
Local Area Connection Properties
window appears. Click on
Internet Protocol (TCP/IP)
, and
then click on
Properties
.
4. The
Internet Protocol (TCP/IP)
Properties window appears. Under the
General
tab, enable
Use the
following IP
address
and the default settings for IP configurations will turn from gray to clear. Enter
the
IP address
,
Subnet mask
and
Default gateway
supplied by your ISP.
If your ISP provides a DNS address, please enter it into the
Preferred DNS
server
box. Click
OK
.
5. The previous
General
tab window appears. Click
OK
.
6. The
Network and Dial-up Connection
window appears. Close this window and complete your
configurations.
Summary of Contents for ADSL 201ER
