12
3. Verifying Connections
a. If the POWER LED on the VisionNet 201ER is not solid RED...
√
Verify that the power adapter is plugged securely into the electric outlet.
√
Verify that the power switch is placed in the
“
On
”
position.
b. If the LAN LED on the VisionNet 201ER is not solid GREEN
⋯
√
Verify that the RJ-45 connection is secure on both the PC Ethernet port and RJ-45 port
on the VisionNet 201ER.
c. If the ADSL LED on the VisionNet 201ER is not solid GREEN within 2 minutes
⋯
√
Check the RJ-11 connection on the LINE port of the VisionNet 201ER. Make sure that the RJ-11 is
securely connected to the LINE port on the VisionNet 201ER from the ADSL wall jack.
4. Question and Answer (Q &A)
Q1
: Why do I need a filter on the telephone line attached to the ADSL service?
A1
: Converting your regular phone into a Digital Subscriber Line (DSL) can cause audible noises
(high pitched tones and static) when you try to talk on the
phone without a filter. You will need to install a filter on
each telephone or device that shares the DSL line to
eliminate this noise; phones or devices that share the
same telephone number as your ADSL service. Other
devices where a filter should be placed include answering
machines and fax machines. The filters will enable both
Internet access and normal phone use at the same time.
Q2
: How do I connect the filter?
A2
: Place the filter in jacks that share the same telephone number with the activated ADSL line.
Q3
: When is a two-way adapter required?
A3
: If your 201ER shares a jack with another telephone, you will need to install a two-way adapter. A
two-way adapter is not a filter; it merely allows two lines to connect into one jack. Plug the two-way
adapter into the wall jack, plug an in-line filter into one of the two jacks on the
two-way adaptor, and
then connect your telephone to the filter. The remaining jack on the two-
way adaptor is used to
connect the 201ER to your ADSL service (a filter should not be used when connecting to your modem).
Summary of Contents for ADSL 201ER
