Vision 2310b, Instruction Manual, Page: 6 / 48

VISION 2310B INSTRUCTION MANUAL
3
Precautions & Safety
OPERATION. Use of the 2310B outside its intended purpose as described in
this Instruction Manual, could result in damage to the vehicle or surround-
ing property, or cause serious injury or even death. As the installer of this
security system, it is your responsibility to ensure that the vehicle owner is
properly informed of all the details of your installation which are pertinent
to safety.
SAFETY POINTS TO ABIDE BY:
Never start the vehicle’s engine in enclosed spaces that lack adequate
1.
ventilation. Extended exposure to carbon monoxide exhaust fumes
can result in death!
Do not disconnect the vehicle’s battery, as it could cause serious prob-
2.
lems with modern airbag systems, anti-theft radios and/or vehicle di-
agnostics. Resulting problems could be so severe that you would need
to have the vehicle serviced, at your expense, by your vehicle dealer.
If you ignore this warning and choose disconnect the vehicle’s battery
anyway, first disconnect the main power wiring harness of the 2310B
and then disconnect the vehicle’s battery.
Do not proceed with installing this system in vehicles that do not
3.
have a 24-volt electrical system. This system will not function prop-
erly in 12-volt vehicles, and any damage resulting from such installa-
tion shall be the sole responsibility of the installer.
Do not install the 2310B control module or associated sensors in or
4.
near water, or in a location where water could gather. The 2310
control module and accessories are not waterproof, and an electrical
short could occur if water gets inside. Only the siren can safely be
installed in the engine compartment.
Do not install the 2310B control module in an environment of intense
5.
condensing humidity or steam, in an area with an unusually large
number of airborne particles, or any place where oil could build up
inside the control module case. All of these extreme environments
could lead to an electrical short and possible cause a fire.
Avoid installing the 2310B and its associated sensors near sources
6.
of intense RF transmissions which could possibly interfere with the
operation of the system. If you find the system is randomly working
and not working, consider relocating the antenna wire and sensors.