Vision 2310b, Instruction Manual, Page: 10 / 48

VISION 2310B INSTRUCTION MANUAL
7
SYSTEM WIRING DIAGRAM
7.5A Fuse
150mA@24v low-power relay driver output
150mA@24v low-power relay driver output
7.5A Fuse
GRN
GRN
(+) Light Flash Output (5A)
YEL
(-) GWA Output (1A@24v)
ORG
(-) Siren Output (1A@24v)
GRN/YEL
(-) Door Lock Output
GRY
(-) Trunk/Hatch Input
(+) Light Flash Output (5A)
(+) 24v Power Out* (1A max.)
BLK
BLK
BLK
BLK
(-) System Ground
(-) System Ground
3
1
2
2
BLU/YEL
(-) Door Unlock Output
WHT
(-) Door Switch Input
BLK
Immobilizer Relay Pair #1
BLK
Immobilizer Relay Pair #2
BLK
Immobilizer Relay Pair #3
BLK
Immobilizer Relay Pair #1
11
10
BLK
Immobilizer Relay Pair #2
13
12
9
BLK
Immobilizer Relay Pair #3
8
WHT 3pin
not used
Shock
Sensor
Status
LED
All-Black Harnesses H2 & H3
are numbered in white at the
tips of each wire.
(-) Ground Output (5A max.)
BLK
RED
(+) 12v Power Out (1A max.)
RED/WHT
BLU/GRN
BLU/GRN
RED
*
NOTE
: Do not use the RED output wire for door
lock connections. It cannot supply enough power.
+24v
H1
H2
H3
FB-706U
15A Fuse
YD-FUSE
FB-706U
(+) 24v System Power
(+) 24v Ignition Input
20A@24v max. (Internal Relay#1)
Both Connected Internally
20A@24v max. (Internal Relay#2)
20A@24v max. (Internal Relay#3)