Vision 2310b, Instruction Manual, Page: 38 / 48

35
OPERATION
PROGRAM FEATURES EXPL AINED
When set to
IG Protect
, the system will trigger the siren when the Ignition
goes on while armed, as described on page 32.
When set to
Idling , the system will bypass the Sensor and Ignition triggers
and IIP will become active when IG goes on while armed, as described on
page 32.
3 IG Protect Mode / Idling Compatibility Mode
When set to ON , vehicle hazard lights will illuminate for safety while the
Ignition is turned on (engine idling).
(Requires light flash to be installed,
and requires Idling Compatibility Mode to be turned ON .)
4 Turn On Lights When Engine Idling
This feature automatically arms the system when you do the following:
(1) Turn IG on, (2) Turn IG off, (3) Open and Close any door. Upon seeing
these events, the system will arm 20 seconds after the last door is closed.
The doors will NOT be locked (so you won’t be locked out if you leave your
keys in the car by accident), but the system will be armed.
8 Auto Arm
This feature automatically rearms the system 60 seconds after it is dis-
armed, unless a door is opened or the Ignition goes on during the 60 sec-
onds. Doors will be locked when the system rearms, if door locking is
installed.
Note that this feature is incompatible with vehicles that auto-
matically illuminate the dome light upon door unlock, unless the 2310’s
door input is wired directly to the “door switch” (and not wired to “door
dome light switch”). The reason is that the system will not rearm if it sees
“a door open” condition.
10 Auto Rearm