Vision 2310b, Instruction Manual, Page: 36 / 48

VISION 2310B INSTRUCTION MANUAL
33
SYSTEM “ARMED” FEATURES
GWA (Ground When Armed)
The 2310 feeds a (–) Ground output while the system is armed. Optional
components can be added to this control line, such as a Starter Kill Immo-
bilizer Relay, door lock interface, or vehicle lighting devices. When the sys-
tem is disarmed, power to this output is removed and all attached devices
shutdown.
See page 7 for details on electrical specifications.
2-STAGE SENSOR TRIGGER
1st Stage (“Warning Chirps”).
When the included shock sensor
detects a light impact to the vehicle body, the siren will chirp 5
times. Note that any optional sensors attached to the shock sen-
sor’s 1st Stage input can also trigger the 5 warning chirps.
No si-
ren chirps will be produced while in Sensor Bypass Mode (or Silent Mode).
2nd Stage (“Full Siren”).
When the included shock sensor de-
tects hard impact to the vehicle body, the siren will go off for 30
seconds (or until stopped by a button press on your transmitter).
Note that any optional sensors attached to the shock sensor’s 2nd
Stage input can also trigger the full siren blast sequence.
The siren will
not be triggered while in Sensor Bypass Mode or Silent Mode.
LIGHT FLASH
When installed, vehicle lights (in most cases, “hazard” lights) will flash con -
tinuously while the siren is going off (during the full 30 seconds). Lights
will also flash 1 time during arm and 3 times during disarm, flash 5 times
during “Warning” triggers (e.g., shock sensor 1st-stage trigger), and flash 2
times during Error Chirp. See pages 7 and 8 for details on installation.