Vision 2310b, Instruction Manual, Page: 30 / 48

27
GENERAL Operation
ARMING
NORMAL METHOD
This method is the typical way to arm the 2310, with
the siren and sensors enabled.
Ensure that all doors are
closed and then press Button-1 on your transmitter. After
you press Button-1, the doors will lock (if so installed) and
vehicle lights will flash once (if so installed). The siren
will chirp 1 time and Status LED will light solid for 5 sec -
onds. Some triggers (sensor, door, etc.) may be bypassed if they occur while
the LED is lit solid.
(See “Error Chirp” on the next page.)
SILENT MODE METHOD
This method of arming will prevent the si-
ren from making any sound (no confirma -
tion chirps, no warning chirps, no siren
blast, etc.). Press Button-2 on the transmitter,
then release. The doors will lock and vehicle lights will
flash once (if so installed), and the Status LED will light
solid for 5 seconds. Some triggers (sensor, door, etc.) may be bypassed if
they occur while the LED is lit solid.
(See “Error Chirp” on the next page.)
OPERATION
Push Button-1
Push Button-2
NO CONFIRMATION CHIRP METHOD
This method of arming is identical to the
“Normal” method except there is no siren
chirp emitted after you arm. Ensure that all
doors are closed and then press Button-3 on the
remote. After you press Button-3, the doors will lock and
vehicle lights will flash once (if so installed). The Status
LED will then light solid for 5 seconds. Some triggers (sensor, door, etc.)
may be bypassed if they occur while the LED is lit solid. (See “Error Chirp”
on the next page.)
Push Button-3