Vision Systems VPNRouter iR 2110 Manual Download Page 54

Page: 54 / 68

9 Services

9.4.1.1. New conguration

There are three dierent options to send the new conguration to a other device.

1. via Cable :

corresponds to point 1 of gure

65 on the preceding page

a) Make sure that the devices are connected together via the LAN port. A switch may be

needed to connect all Clients.

b) Check that the conguration is correct and certicates and keys are present.

c) To send the conguration to the partner device use the button [via Cable] in the area

Send/Save Partner conguration.

d) A list of all connected VPNRouters is presented.

e) Choose a VPNRouter by clicking on it. The SimpleVPN page is shown (after authentica-

tion if a password was already set). The APP LED will also light to show which Router

you are conguring.

f) Please choose a Client. Use the button [Selected] to apply the Client congurations.

The button [Selected] will be displayed in green.

g) Continue with the remaining Routers at e).

2. via USB:

corresponds to point 2 of gure

65 on the previous page

a) Make sure that the USB stick is connected to the USB port on the device.

b) Check that the conguration is correct and certicates and keys are present.

c) When you use the button [via USB] in the area Send/Save Partner conguration a

new folder will be created on the USB Stick with congurations, certicates and keys in

it.

d) Disconnect the USB stick from the USB port.

e) Disconnect the device from the LAN port.

f) Connect a VPNRouter Client to your PC via the LAN port with an Ethernet cable.

g) Connect the USB stick to the Router.

h) Then open your browser and type the IP Address 192.168.178.1 into the address bar.

i) Logon the Web UI (Webinterface) see section

6.2 on page 26

j) Open the SimpleVPN site.

k) To apply the conguration for the Client use the button [via USB] in the area Apply

pre-congured settings.

l) Please choose the corresponding Client. Use the button [Selected] to apply the Client

congurations. The button [Selected] will be displayed in green.

m) Disconnect the USB stick from the USB port.

Juli 2016

VPNRouter Software Manual

Summary of Contents for VPNRouter iR 2110





































































Search results

Summary of Contents for VPNRouter iR 2110

Reviews:

Related manuals for VPNRouter iR 2110

Brands by name

Popular brands

Vision Systems VPNRouter iR 2110, Manual

Search results

Summary of Contents for VPNRouter iR 2110

Reviews:

Related manuals for VPNRouter iR 2110

Brands by name

Popular brands