7 Network
7.2.4. Conguration Procedures
These are suggested sequences to congure the WLAN function
7.2.4.1. as Access Point
1. Under Adapter check Enable.
2. Under Adapter select the Mode.
3. Under Adapter select a Channel for communication.
4. Under Local Network provide a unique name (ESSID) for your WLAN communication. The
default value of VS_InRouter_<SNo.> is ne for start, other values are OK.
5. Under Local Network select Operation as Provide (Access Point).
6. Under Local Network select Encryption as WPA2-PSK.
7. Under Local Network dene a secure Key for encryption. About 16 random letters or digits
are a good start.
8. Click on the
[Save]
button and wait for the changes to be applied.
7.2.4.2. as Client
1. Under Adapter check Enable.
2. Under Local Network select Operation as Join (Client).
3. Click on the
[Save]
button and wait for the changes to be applied.
4. Under Networks click the button for [Scan] , and wait for the results. Check if the target
WLAN network is visible.
5. Under Adapter select the Mode according to the result of the Scan.
6. Under Local Network enter the ESSID for the target WLAN network.
7. Under Local Network select the appropriate mode for Encryption. In case of doubt ask the
network administrator.
8. Under Local Network enter the Key for encryption. You get that from the network adminis-
trator as well.
9. Again click on the button
[Save]
and wait for the changes to be applied.
Juli 2016
VPNRouter Software Manual
36
