6 Logon to the Device
5.10. SD-Slot
The VPNRouter provides an SD-Slot on the front side of the case, for cards
in microSD size. The slot supports cards as SD 2.0 or SDHC type, to allow
up to 32 GB of capacity. Class 10 cards are supported as well.
If an operating system is installed on the SD Card, the VPNRouter will boot
this software.
Figure 31: SD Slot
6. Logon to the Device
The Device is congured via an internal web interface. In part this is similar to many SOHO-Routers
on the market. Consequently you need a network connection to the Device, where you then open
your browser to access the web interface. Basically there is one way to get the required access. In
the description here it is assumed the Device is in factory conguration.
6.1. Connect to the Device
6.1.1. Ethernet Cable to LAN Port
That is the option for on-site access, i.e. you are in front of the Device. Plug the Ethernet cable
from your PC into a LAN port (not the WAN port). Your PC uses DHCP to get an IP Address
from the Device. Then open your browser and type the IP Address 192.168.178.1 into the address
bar.
6.2. Logon to Device Web Interface
By default there is no password set. The Username is xed as user.
Figure 32: Logon Mask
Juli 2016
VPNRouter Software Manual
26
