3 of 9 pages
direction of all programs.
17.
Add or Kill/Rec Exit-
In All mode, multiple scenes or Flash buttons will be on at a time. In Kill
mode. Pressing any Flash button will any other scenes or programs. Rec
Exit is used to exit from program or Edit mode.
18.
Record/Shift-
Record is used to activate Record mode or program a step. Shift
functions only used with other buttons.
19.
Master A Button-
Brings channel 1-12 to full of current setting.
20.
Park Button-
Used to select Single/Mix Chase, bring Channel 12-34 to full of current
setting, or momentarily program a scene into Master B slider, depending on
the current mode.
21.
Hold Button-
This button is used to maintain current scene.
22.
Step Button
This button is used to go to next step when the Speed Slider is pushed to
the bottom or in Edit mode.
23.
Audio Button-
Activates audio sync of chase and audio intensity effects.
24.
Master Slider A-
This slider controls overall output of all channels.
25.
Master Slider B
This slider controls the chase of all channels.
26.
Blind Button-
This function takes the channel out of the chase of a program in
CHNS/SCENE mode.
27.
Home Button-
This button is used to deactivate the Blind.
28.
Tap Sync Button-
Repeatedly tapping this button establish the chase speed.
29.
Full On Button-
This function bring overall output to full intensity.
30.
Black Out Button-
This button is used to kill all output with exception for that resulting from
Flash and Full On.
31.
Fade Time Slider-
Used to adjust the Fade Time.
32.
Speed Slider-
Used to adjust the chase speed.
33.
Audio Level Slider-
This slider controls the sensitivity of the Audio input.
34.
Fog Machine Button-
Rear Panel:
.
35.
Power Switch-
This switch controls turning on or off the power.
36.
DC Input-
DC 12-20V, 500Ma Min.
37.
MIDI Thru/Out/In-
MIDI ports for connection to a sequencer or MIDI device.
38.
DMX Out-
This connector sends your DMX value to the DMX fixture or DMX pack..
39.
DMX Polarity Select-
Used to select DMX polarity.