2 of 9 pages
3.
In the unlikely event your unit may require service contact your nearest
dealer
Ⅳ
. CONTROLS AND FUNCTIONS
Front panel:
1.
Preset A LEDs-
Show the current intensity of the relevant channel numbered from 1 to 24.
2.
Channel Sliders 1-24-
These 24 sliders are used to control and/or program the intensities of
cannels 1-24
3.
Flash Buttons 1-24-
These 24 buttons are used to bring an individual cannel, to full intensity.
4.
Preset B LEDs-
Show the current intensity of the relevant channel numbered from 25-48.
5.
Scene LEDS-
Light when relevant scenes are active
6.
Channel Sliders 25-48-
These 24 sliders are used to control and/or program the intensities of
channels 25-48
7.
Flash Buttons 25-48
These 24 buttons are used to bring an individual channel, to full intensity.
They also are used for programming.
8.
Dark Button-
This button is used to momentarily black out overall output.
9.
Down/Beat Rev-
Down buttons to modify a scene in Edit mode, BEAT REV is used to
reverse the chasing direction of a program with regular beat.
10. Mode Select/Rec Speed-
Each tap will activate the operating mode in the order: CHAS/SCENES
Double Preset and Single Preset. Rec Speed; Set the speed of any of the
programs chasing in Mix mode.
11.
Up/Chase Rev-
Up is used to modify a scene in Edit mode. Chase Rev is to reverse the
chasing, direction of a scene under Speed Slider control.
12.
Page Button-
Tap to select pages of scenes from page 1-4.
13.
Delete/Rev One-
Delete any step of a scene or reverse the chasing direction of any
program.
14.
Segment Display-
Shows the current activity or programming state.
15.
Insert % or 0-255-
Insert is to add one step or steps into a scene. % or 0-255 is used to
change display value cycle between % 0-255.
16.
Edit/All Rev-
Edit is used to activate Edit mode. All Rev is to reverse the chasing
