Viro RAM-TOUCH, User Manual

Page: 63 / 94

Page
61
of
88
User manual
If performed correctly, 3 beeps will be emitted and the display will show:
If the position is occupied and OK is pressed, the display will show:
Press OK again to cancel the stored fingerprint; 3 beeps will be emitted to
confirm erasing and the display will show:
Note: if a position is occupied by a code and not a fingerprint, the display
will show:
If you wish to cancel the code stored in this position, see page 64.
Note: if a “Master” fingerprint is present, it must be swiped before
proceeding with the operations for storing/erasing other fingerprints.
The request to swipe the “Master” fingerprint is shown on the display and by the
red LEDs flashing in sequence from top to bottom.
If the “Master” fingerprint is not recognized, the display will show:
For management of the safe/cabinet with a “Master” fingerprint, see the following
page.