Viro RAM-TOUCH, User Manual

Page: 82 / 94

User manual Page
80
of
88
4.3 Humidity Alarm Menu
Note: this prevents damage due to the formation of condensation which could
oxidize jewellery and watches and damage any documents in the safe/cabinet.
The
system measures the temperature and humidity inside the
safe/cabinet every ten minutes and when the relative humidity exceeds 90% an
acoustic signal (3 beeps) and visual alarm is activated for thirty seconds; the
alarm is repeated on the hour, every hour until the humidity falls below 90%, but
can be interrupted at any time by pressing any button.
To set the alarm, press OK. The display will show:
or
Press OK to change the alarm setting; if activated it will be deactivated and vice
versa. The system will emit 3 beeps and the display will show:
or
If BACK is pressed instead, the system will return to menu 4 without changing
any setting.
Note: the humidity alarm is useful only if the safe/cabinet is located in a place
where the acoustic signals can be heard; if not, there is the risk that the alarm
is activated and continues to sound without anyone realising, thus decreasing
the duration of the batteries. For the same reason, it is advisable to deactivate
the alarm if going away for a long period.