Viro RAM-TOUCH, User Manual

Page: 59 / 94

Page
57
of
88
User manual
Turn on the reader by pressing BACK to open with a code. The
display will show the following messages in sequence:
A code can now be inserted.
If you wish to cancel the operation and switch off the system, press BACK.
Use the arrow buttons and to move the cursor to the digit to be entered,
press OK to confirm and the code will be displayed on the second line; if the
cursor is positioned on the letter “C” and OK is pressed, the code entered up to
that point will be reset, while if the cursor is positioned on the letter “E” and OK is
pressed, the code is accepted (if at least 3 digits have been entered), 3 beeps are
emitted and the display shows:
After turning the knob, the display will show the information relative to the last
opening before this one:
and the message: