User manual
Page
52
of
88
Insert/replacing the batteries
The
electronic system is powered by 4 AA LR6 1.5V batteries
contained in a compartment on the inside of the door. Alkaline batteries are
recommended for maximum functioning duration.
Note: use only new batteries and never mix new and used batteries.
With the door open, remove the plastic cover of the battery compartment, remove
the batteries and insert/replace the batteries, respecting the + and - signs
indicated on the battery compartment.
Figure 3: plastic cover and battery compartment
on the safe (top) and cabinet (bottom)
As soon as all 4 batteries have been inserted, the electronic system carries out an
auto-check and emits three short beeps. If no beep is heard, the batteries have
not been inserted correctly: check that the batteries have been inserted correctly,
respecting the + and - signs.
Note: if the batteries have been accidentally inverted, the system will not
be activated but no damage will be done.
Summary of Contents for RAM-TOUCH
