Viro RAM-TOUCH, User Manual

Page: 80 / 94

User manual Page
78
of
88
4.2 Silent Alarm Menu
It is possible to activate the “Silent Alarm” option for each individual memory
position (fingerprint/code). If the “Silent Alarm” is activated, the door will open
normally when a fingerprint is swiped or a code is entered, but a relay output is
activated at the same time; when the safe/cabinet is installed this must be
connected to an additional alarm module, such as for example the “Viro M.A.C.
Mobile phone Burglar-alarm Module” (item 4399) or to a centralized burglar alarm
system. For connection to an external alarm, see page 87.
Note: the “Silent Alarm” provides additional break-in protection, making it
possible to activate remote alarms without the burglar being aware of it, since
the user does not do anything particular or unusual when opening the
safe/cabinet under threat.
By storing two different codes (e.g. in positions 1 and 3) to open the
safe/cabinet and associating only one of these (e.g. the one in position 3) with
the silent alarm, the user can use the code stored in position 1 to open the
safe/cabinet under normal conditions, while, if under threat, he/she can use
the code stored in position 3 to open the safe/cabinet and at the same time
activate the remote alarm without the burglar being aware of it.