Viro RAM-TOUCH, User Manual

Page: 55 / 94

Page
53
of
88
User manual
Replace the battery compartment cover.
After a few seconds, the display will show the following messages in sequence:
and
it is now possible to verify/change the date and time (see page 83). If no button is
pressed, after around 10 seconds the safe/cabinet automatically stores the date
and time shown on the display, i.e. the date and time of the last operation in the
Audit Trail.
Note: after inserting or replacing the batteries, it is advisable to check
that the date and time are correct.
The
electronic system can detect the battery level. When it is
necessary to replace the batteries, all the red LEDs light up, 3 beeps are emitted
and the display will show:
These indications will be repeated every time the safe/cabinet is operated until the
batteries have been replaced.
If the battery replacement indications are ignored until they are completely flat, it
is still possible to open the safe/cabinet
by means of the emergency opening
procedure (see page 71).