VIPA CP 343-2AH10, Manual

Page: 56 / 92

Chapter 5 Deployment Command interface
Manual VIPA System 300V
5-4 HB130E - CP - RE_343-2AH10 - Rev. 08/41
DONE ERROR STATUS Meaning
1 0 0000h
Job is complete without error
0 1 8090h Address in LADDR invalid
0 1 8092h A type other than BYTE is specified in the ANY reference
0 1 8093h This SFC is not permitted fort he modules selected with
LADDR and IOID.
0 1 80A0h Negative acknowledgment when reading from AS-i
master
0 1 80A1h Negative acknowledgment when writing to AS-i master
0 1 80A2h DP protocol error at layer 2
0 1 80A3h DP protocol error at user interface/user
0 1 80A4h Communication problems on bus
0 1 80B0h AS-i master does not recognize the data record
0 1 80B1h Specified data record length incorrect
0 1 80B2h The configured slot is not use.
0 1 80B3h Actual module type does not match the expected module
type in SDB1
0 1 80C0h Data record cannot be read
0 1 80C1h The specified data record is currently being processed
0 1 80C2h There is a job pileup.
0 1 80C3h Resource (memory) in use
0 1 80C4h Communication error
0 1 80C5h Distributed I/Os not available
0 1 80C6h Data record transfer aborted due to priority class abort
(warm restart or background) of the distributed I/Os.
0 1 8181h
Job active (no error)
0 1 8182h
ID from block execution with STARTUP=TRUE
(not an error)
0 1 8184h Data type of the RECV formal parameter illegal
0 1 8381h The AS-i slave address is incorrect.
0 1 8382h The AS-i slave is not activated (not in LAS).
0 1 8383h Error on the AS interface.
0 1 8384h Command not permitted in the current status of the AS-i
master.
0 1 8385h An AS-i slave with address 0 exists.
0 1 8386h The AS-i slave has illegal Configuration data (I/O or ID-
Codes
).
0 1 83A1h The addressed AS-i slave was not found on the AS
interface.
0 1 83A2h An AS-i slave with address 0 exists.
0 1 83A3h An AS-i slave with the new address already exists on the
AS-Interface.
0 1 83A4h The AS-i slave address cannot be deleted.
0 1 83A5h The AS-i slave address cannot be set.
0 1 83A6h The AS-i slave address cannot be stored permanently.
0 1 83A7h Error reading the extended ID1 code
0 1 83A8h The target address is not plausible (for example a B
slave address was used for a standard slave).
continued ...
Error Coding