VIPA CP 343-2AH10, Manual

Page: 47 / 92

Manual VIPA System 300V
Chapter 4 Deployment CP 343-2P ASI
HB130E - CP - RE_343-2AH10 - Rev. 08/41 4-15
In the following there is an extract (local byte 8...11) from the record set 0
of the OB 82.
Local byte Bit Variable Data
type Description
8 0 OB82_MDL_DEFECT BOOL Group error bit
0: Interrupt going
1: Interrupt incoming
1 OB82_INT_FAULT BOOL Internal error e.g. Flash-ROM defective
2 OB82_EXT_FAULT BOOL External error e.g. slave failed or APF
3 OB82_PNT_INFO BOOL At least one slave differs from the
expected configuration
4 OB82_EXT_VOLTAGE BOOL Voltage on the AS-interface to low
(APF)
5 OB82_FLD_CONNCTR BOOL with the CP always 0
6 OB82_NO_CONFIG BOOL with the CP always 0
7 OB82_CONFIG_ERR BOOL with the CP always 0
9 OB82_MDL_TYPE BYTE Module class: for CP: 1Ch
10 0 OB82_SUB_MDL_ERR BOOL At least 1 slave differs from the
expected configuration
1 OB82_COMM_FAULT BOOL with the CP always 0
2 OB82_MDL_STOP BOOL Operating mode
0: CP is in normal state
1: CP is offline
3 OB82_WTCH_DOG_FLT BOOL Hardware error of the CP
(internal watchdog)
4 OB82_INT_PS_FLT BOOL with the CP always 0
5 OB82_PRIM_BATT_FLT BOOL with the CP always 0
6 OB82_BCKUP_BATT_FLT BOOL with the CP always 0
7 OB82_RESERVED_2 BOOL with the CP always 0
11 0 OB82_RACK_FLT BOOL with the CP always 0
1 OB82_PROC_FLT BOOL with the CP always 0
2 OB82_EPROM_FLT BOOL Flash-ROM defective
3 OB82_RAM_FLT BOOL with the CP always 0
4 OB82_ADU_FLT BOOL with the CP always 0
5 OB82_FUSE_FLT BOOL with the CP always 0
6 OB82_RESERVED_3 BOOL with the CP always 0
Local data OB 82
record set 0