Chapter 5 Deployment Command interface
Manual VIPA System 300V
5-32
HB130E - CP - RE_343-2AH10 - Rev. 08/41
Read_AS-i_Slave_Extended_ID2
With this call the extended ID2 code of an AS-i slave may be read out
directly via the AS-i cable. The call is intended for diagnostic purposes and
is nor required in the normal master mode.
Structure of the Job Data in the Send buffer
Byte
Meaning
0
Command number: 38h
1 Slave
address
The response of the AS-i master contains the name and the firmware
version number.
Structure of the Job Data in the Receive buffer
Meaning
Byte
Bit 7 Bit 4 Bit 3 Bit 0
0
reserved
Extended ID2 code
Read_AS-i_Slave_I/O
With this call the I/O configuration of an AS-i slave may be read out directly
via the AS-i cable. The call is intended for diagnostic purpose and is not
required in the normal master mode.
Structure of the Job Data in the Send buffer
Byte
Meaning
0
Command number: 18h
1 Slave
address
The response of the AS-i master contains the name and the firmware
version number.
Structure of the Job Data in the Receive buffer
Meaning
Byte
Bit 7 Bit 4 Bit 3 Bit 0
0 reserved
I/O
configuration
Description
Description
