Manual VIPA System 300V
Chapter 5 Deployment Command interface
HB130E - CP - RE_343-2AH10 - Rev. 08/41
5-31
Read_AS-i_Slave_Extended_ID1
With this call the extended ID 1 code of an AS-i slave may be read out
directly via the AS-i cable. The call is intended for diagnostic purposes and
is not required in the normal master mode.
Structure of the Job Data in the Send buffer
Byte
Meaning
0
Command number: 37h
1 Slave
address
The response of the AS-i master contains the name and the firmware
version number.
Structure of the Job Data in the Receive buffer
Meaning
Byte
Bit 7 Bit 4 Bit 3 Bit 0
0
reserved
Extended ID1 code
Write_AS-i_Slave_Extended_ID1
With this call the extended ID1 code of an AS-i slave with address "0" may
be written directly via the AS-i cable. The call is intended for diagnostic
purposes and nor required in the normal master code.
The AS-i master passes on the extended ID1 code to the AS-i slave without
any plausibility check.
Structure of the Job Data in the Send buffer
Byte
Meaning
0
Command number: 3Fh
1
irrelevant
Extended ID1 code
Description
Description
