Manual VIPA System 300V
Chapter 5 Deployment Command interface
HB130E - CP - RE_343-2AH10 - Rev. 08/41
5-5
... continue
DONE
ERROR
STATUS Meaning
0
1
83B1h
A length error has occurred transferring a string
according to profile 7.4.
0
1
83B2h
A protocol error has occurred transferring a string
according to profile 7.4.
0
1
83F8h
The job number or the job parameter is unknown.
0
1
83F9h
The AS-i master has detected a Flash-ROM error.
0 1
8F22h
8F23h
Area length error reading a parameter
Area length error writing a parameter
This error code indicates that a parameter is entirely or
partly outside the address area or that length of a bit
array of an ANY parameter cannot be divided by 8.
0 1
8F24h
8F25h
Area error reading a parameter
Area error writing a parameter
This error codes indicates that a parameter is located in
an area that is illegal for system function.
0 1
8F28h
8F29h
Alignment error reading a parameter
Alignment error writing a parameter
This error codes indicates that the reference to a
parameter is a bit address other than 0.
0 1
8F30h
8F31h
The parameter is in the write-protected global DB
The parameter is in the write-protected instance DB
This error code indicates that a parameter is located in a
write-protected data block.
0
1
8F32h
The DB number in the parameter is too high
0
1
8F3Ah
The parameter contains the number of a DB that is not
loaded.
0 1
8F42h
8F43h
An access error has occurred while the system
attempted to read out a parameter from the peripheral
area of the inputs.
An access error occurred while the system was
attempting to write a parameter to the peripheral area of
the outputs.
0
1
8F44h
This parameter code indicates that read access to a
parameter was denied.
0
1
8F45h
This parameter code indicates that write access to a
parameter was denied.
0 1
8F7Fh
Internal
error
