36
Max Failure per Job
[030] OK?
Setup
13.Max Failure per Job
Setup
14.Max Failure per Drive
Max Failure per Job
[030] OK?
13.13 Max Failure per Job
Use this setting to set the maximum failures the autoloader is allowed per job. Once the maximum is
reached, the job will be stopped. The default value for this setting is 30.
Use the
Up or Down
button to select the
Max Failure per Job
menu and press the
ENT/Enter
button to enter that menu.
You can select numbers between 1 to 999 by pressing the
Up or Down
button:
To specify the number of maximum failures per job, you need to
enter/input a three-digit number.
If you need to specify a number that is less than three digits, fill the leading spaces with zeros (any leading
zeros will be skipped). Examples of three-digit numbers are “034” (thirty four), or “010” (ten).
To enter the number, you need to use the
Up or Down button
to select the number for each digit and
use the
ENT/Enter
button or the
ESC/Escape
button to move the cursor position right or left. Once you've
finished, move the cursor to
“OK”
and press the
ENT/Enter
button. For example, if you want to specify a
counter value of 21 (twenty one). The three-digit value would be “021.” To input the desired quantity, do the
following:
Make sure the cursor is located at the first position (First blinking position):
Press
the
Down
button repeatedly until “0” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press
the
Down
button repeatedly until “2” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press
the
Down
button repeatedly until “1” is displayed.
Now, “021” is displayed, press
ENT/Enter
button once and the cursor moves to
“OK”
.
Then, press the
ENT/Enter
button once to submit your maximum failures per job.
13.14 Max Failure per Drive
Use this setting to set the maximum failures each drive is allowed per job. Once the maximum is reached for
any particular drive, such drive will be disabled for the remainder of the job. The default value for this setting
is 5.
Use the
Up or Down
button to select the
Max Failure per Drive
menu and press the
ENT/Enter
button to enter that menu.
You can select numbers between 1 to 999 by pressing the
Up or Down
button:
To specify the number of maximum failures per job, you need to
enter/input a three-digit number.
If you need to specify a number that is less than three digits, fill the
leading spaces with zeros (any leading zeros will be skipped). Examples of three-digit numbers are “034”
(thirty four), or “010” (ten).
To enter the number, you need to use the
Up or Down button
to select the number for each digit and
use the
ENT/Enter
button or the
ESC/Escape
button to move the cursor position right or left. Once you've
finished, move the cursor to
“OK”
and press the
ENT/Enter
button. For example, if you want to specify a
counter value of 21 (twenty one). The three-digit value would be “021.” To input the desired quantity, do the
following:
Make sure the cursor is located at the first position (First blinking position):
