Vilter VSM 71-701, Operation And Service Manual

Page: 3 / 244

3
Important Note:
READ CAREFULLY BEFORE INSTALLING AND STARTING YOUR COMPRESSOR.
The following instructions have been prepared to assist in installation, operation and removal of Vilter Single
Screw Compressors. Following these instructions will result in a long life of the compressor with satisfactory
operation.
The entire manual should be reviewed before attempting to install, service or repair the compressor.
A refrigeration compressor is a positive displacement machine. It is designed to pump superheated
vapor. The compressor must not be subjected to liquid carry over. Care must be exercised in properly
designing and maintaining the system to prevent conditions that could lead to liquid carry over. Vilter
Manufacturing Corporation is not responsible for the system or the controls needed to prevent liquid
carry over and as such Vilter Manufacturing Corporation cannot warrant equipment damaged by im-
properly protected or operating systems.
Vilter screw compressor components are thoroughly inspected at the factory, assuring the shipment of a
mechanically perfect piece of equipment. Damage can occur in shipment, however. For this reason, the
units should be thoroughly inspected upon arrival. Any damage noted should be reported immediately
to the Transportation Company. This way, an authorized agent can examine the unit, determine the
extent of damage and take necessary steps to rectify the claim with no serious or costly delays. At the
same time, the local Vilter representative or the home office should be notified of any claim made.
All inquires should include the Vilter order number, compressor serial and model number. These can be
found on the compressor name plate on the compressor.
All requests for information, services and or parts should be directed to:
Vilter Manufacturing Corporation
Customer Service Department
5555 South Packard Ave
P.O. Box 8904
Cudahy, WI 53110-8904 USA
Telephone: 1-414-744-0111
Fax:1-414-744-3483
e-mail: vilter@execpc.com
Equipment Identification Numbers:
Vilter Order Number: __________________________Serial Number: _____________
Vilter Order Number: __________________________Serial Number: _____________
Vilter Order Number: __________________________Serial Number: _____________
Vilter Order Number: __________________________Serial Number: _____________
Vilter Order Number: __________________________Serial Number: _____________