Villager VLP 1610, Manual, Page: 28 / 137

12
Maintenance
There are no parts inside the equipment which require additional maintenance.
INSPECTION
1. Inspecting the tool
Since use of a dull tool will cause motor malfunctioning and degraded efficiently, when
it or replace with a new one without delay when abrasion is noted.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened.
Should any of the screws be loose retighten them immediately. Result in serious
hazard.
3. Maintenance of the motor
The motor unit winding is the very “heart” of the power too l. Exercise due care to
ensure the winding does not become damaged and/or wet with oil.
Note: Due to continuing program of research and development the specifications herein
are subject to change without prior notice.
Environmental protection
Waste electrical products should not be disposed of with house hold
waste Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.